Stock Status:  
If we have stock in our Florida or Oklahoma facility stock status will show a number.  If stock status says "See shipping info. tab"  then we do not have sufficient stock level in our main warehouse.  However, we have access to over 30 distribution warehouses across the country, with our main suppliers delivering shipments to us the next business day.  In the event that you order an item that we are out of stock, we make every attempt to bring in your item the next business day for reshipment.  This will normally only delay your order by 1-2 business days.  If we can't supply the item because our vendors are also out of stock we will contact you by phone or email.

If stock level shows to be less that what you require, please order as many items as you need and we can normally fill the order within a few days or will contact you if sufficient stock is not available from our suppliers

Due to changes in our distribution channels, to expedite our transit times, we now ship from dozens of vendors across the country, with our primary distribution center in Florida. We do try very diligently to source orders as closely as possible to your location but this is not always possible due to inventory availability.  Most orders placed before 2pm EST. that are in stock will still be shipped the same business day.

ENGINE SHIPPING:
We stock the most popular fast moving engines, but often we can't keep up with demand or have them arriving daily for reshipment.  For many brands, we can ship direct from the manufacturers warehouse to you, this will speed shipment time.  We will contact you if there is a supply issue, otherwise you can expect you engine to arrive in 2-7 business days depending on your location.  We do not ship to Alaska or Hawaii.   

Do you need a commercial address for engine delivery?  
This is how it works:

Engines showing stock level of 1 or more: No commercial address needed.

Engines not in stock in our Florida or Oklahoma warehouse as follows:

Honda: No commercial address needed. Shipped UPS or Fedex Ground
Briggs & Stratton: Commercial address required for truckline shipment, some engines under 70 lbs can go Fedex or UPS ground. Contact us via chat to verify.

Kawasaki: Commercial address required for truckline shipment, except small frame engines below 7 hp.
Kohler: Commercial address required for truckline shipment, except for small frame engines below 10 hp.

Commercial Address Required:  This means we can't ship to your home, home based business, church, farm, school, prison or any other facility with limited access.  The business needs to be open normal business hours Monday - Friday.  Truckline shipments normally take 2-5 business days depending on your location.  They do not call in advance since there should always be someone at the place of business.  Examples are:

• Lumber Yard
• Auto Parts Store
• Shipping Warehouse
• Lawnmower Shop
• Auto Repair Shop

If you are not able to locate a commercial shipping address, please give us a call and we may be able to arrange shipment to a truckline dock in your area. 

PARTS :

Note:  Please provide a shipping address that is valid for USPS OR UPS. If orders are small and light, we normally use USPS Mail for faster service times.  If over 3-5 lbs, we would normally use UPS or Fedex.   Also note:  In the event we do not have sufficient stock, or our inventory level was wrong, we will bring in extra inventory to reship your order the next business day.  We may also choose to ship large orders from multiple warehouses to speed up delivery time.   

******* Due to Factory & Vendor territories and EPA laws, we do not ship to Alaska, Hawaii or any country outside the US.  These orders will be cancelled and refund issued.

While we are not required to collect sales taxes on your order for any states other than Florida, Oklahoma or Washington you may still have a tax liability to your state. Please check with local tax affiliates for laws regarding taxes

VANGUARD 23.0 Gross HP
627 CC
Bore 2.97 in. (75.5 mm)
Stroke 2.76 in. (70 mm)
Oil Capacity 48 fl. oz. (1.4 L)
Feature
Dura-Bore cast iron cylinder sleeve for extended life
Dependable float feed type carburetor with integral fuel pump for remote mount fuel tank
Dual-Clean air cleaner pleated paper filter with a foam pre-cleaner ensures maximum protection for extended engine life
Full pressure lubrication with spin-on oil filter assures controlled lubrication for extended component life
Overhead valve design (OHV) for cooler operation and longer valve life
Shipping Weight 93 LB
Crankshaft position V
Crankshaft # 809830
Crankshaft (P.T.O) Extension Tapped 7/16-20, Keyway, 1-1/8 " dia.
Dimensions 4(b)
Starter Position N/A
Oil Filter & Drain N/A
Starter Position - Bolt On/ Changeable N/A
N/a Ext. Oil Fill & Dipstick Yes
Oil Cooler N/A
Governor N/A
controls N/A
Manual Choke N/A
Exhaust System N/A
Pulse Fuel Pump N/A
Choke-A-Matic N/A
Ground Wire Terminal Yes
Accessory Mtg. Boss N/A
Primer carburetor N/A
5 position choke N/A
Ready Start N/A
High Debris Air Inlet N/A
Heavy flywheel N/A
Oil Pump w/Filter Yes
Manual & Remote Choke N/A
Remote Choke Yes
Compliance Brake N/A
Fuel Tank Size N/A
Fuel Tank (Quarts) N/A
TransportGuard, Fuel/Ignition Shut-off N/A
Key Switch Stop N/A
Remote Stop Switch N/A
Oil Guard N/A
Flange Mtg. N/A
Electronic Fuel Management N/A
Top Governor Speed 3600
Additional Notes
Engine equipped with 12 Volt Gear Drive Starter and 16 AMP DC Alternator

386777-3025-G1
Vanguard
23.0 gross HP
627 CC

Commercial address required for delivery


1 1/8" x 4" Crankshaft (843816)
7/16-20 drilled and tapped
1/4 key

Engine equipped with 12 Volt Gear Drive Starter and 16 AMP DC Alternator

Controls: R

Oil cooler

Fuel pump

Oil pump

Remote choke

No fuel tank

No muffler

Supress Afterfire Solenoid

Bore 2.97 in. (75.50 mm)
Stroke 2.76 in. (70.00 mm)
Oil Capacity 48 fl. oz. (1.40 L)

Dura-Bore™ cast iron cylinder sleeve for
extended life
Dependable float feed type carburetor with
integral fuel pump for remote mount fuel tank
Dual-Clean™ air cleaner pleated paper filter with
a foam pre-cleaner ensures maximum protection
for extended engine life
Full pressure lubrication with spin-on oil filter
assures controlled lubrication for extended
component life
Overhead valve design (OHV) for cooler operation
and longer valve life

Briggs & Stratton suggests that this engine is a suitable replacement for the following engine models:

386777-0114-G1, 386777-0114-E1, 386777-0025-G1, 386777-0025-E1, 385777-0116-G1, 385777-0116-E1, 386777-3025-G1, 386777-3025, 386777-3025, 386777-0025-01, 386777-0025-E1, 386777-0025-E2, 386777-0025-E3, 386777-0025-E4, 386777-0025-E9, 386777-0025-B1, 386777-0025-B2, 386777-0025-B3, 386777-0025-B9, 386777-0025-02, 386777-0025-E7, 386777-0114-G1, 386777-0114-E1, 386777-0025-G1, 386777-0025-E1, 385777-0116-G1, 385777-0116-E1, 386777-3025-G1, 386777-3025 among other engines.

Also note that some engines may require use of old engine parts or items supplied by the OEM to correctly interchange

If you would like for us to verify the application as shown or to check for availability on your original engine model, please contact our sales staff for assistance.


Please contact us via live chat before ordering to verify proper application and fitment, otherwise TEW Inc. is not responsible for incorrect item(s) received.