Transparent frame
Full vision in all directions

Replaces: Briggs 19230
Expandable from 1-3/4" to 3-1/2"
2" depth to take all rings at once

For small motors 2 to 3 bore.
For correct ring job, the upper ridge in the cylinder must be removed.
Will prevent ring damage

15/16 Diameter
For use with 95-2076 Valve Seating Tool

For our 7-05229 Cylinder Hone
3 stones per set
2 stone
Fine cut

Sold in packages of 200 only

Replaces: Briggs & Stratton 19244
To be used with an air impact wrench

Walbro 57-11

Range: 1-1/4" to 2-1/4"
Remove or install piston rings without danger of breaking or distortion

Range: 2 to 4
Remove or install piston rings without danger of breaking or distortion
No adjustments to make

Fits up to 5 1/2 diameter pistons
Hardened cutters 5/64, 3/32, 1/8, 5/32 and 3/16
Removes harmful deposits from ring groove

For or Quick, Easy & Clean Oil Changes
Large 8.8 Liter (2.3 Gallon) capacity

For Quick, Easy & Clean Oil Changes.
This 8.8 Liter (2.3 Gallon) capacity air operated extractor can be used
to remove a wide range of fluids, such as engine oil, brake fluid, antifreeze and more.

For or Quick, Easy & Clean Oil Changes.
The integrated 1.7 Gallon/6.5 liter container then captures the oil preventing messy spills.

Companion tool for our 95-2078
Permanent magnet holds split valve locks for easy placement

A perfect tool to use for preventative maintenance, especially for engines that are subject to seasonal storage, designed to test ignition system under load conditions.

Used in conjunction with: 95-2014, 95-2015 and 95-2016 to remove the starter clutch on all Briggs & Stratton engines.

Replaces: Briggs 19069, 19165
Fits models 80000 -190000 (2.5 HP to 7 HP)

For Briggs & Stratton engines
Place over crankshaft and tap lightly to free flywheel

Used on 3 and 3 1/2 HP engines

Used on 4 and 5 HP engines

Used on 6, 7 and 8 HP engines

Fully adjustable - one size fits all
Wire mesh shield

Range: 1 1/4 to 3 1/2
Length 7 3/4
Flexible shaft makes it easy to hone cylinders

For Briggs & Stratton application
Fast & easy way to install condensers

2 1/2 diameter
Reads up to 200 P.S.I.
Fits 14mm and 18mm spark plug holes
3/4 hex at base for installation and removal

Walbro #500-500

Walbro #500-13
Used To Set Proper Lever Height on Diaphragm Carburetors

Blade locking tool.
Will not mar or harm your mower.
Simple 1 minute installation.

Universal
Deluxe Stone cone

Contains 14-1.25mm thread size inserts of different lengths to accommodate the most common spark plug reaches.

Contains metric thread sizes most often found on professional chain saws and imported engines

Contains common inch thread size used on lawnmowers, tractors, tillers, splitters and other types of outdoor power equipment.

Contains smaller inch sizes for making thread repairs on chain saws, weed trimmers and small carburetors.

12 Volt battery and generator systems
 

1/4" ID X 25' Length
Up To 200 P.S.I.

60 Repair Strips for our 752-178 tubeless tire repair kit

This professional quality kit contains: Insertion tool Heavy-duty spreader probe Lube Spare needle 2 razor blades 30 repair strips Allen wrench Plastic carrying case

For use on 4" to 15" tires
Includes a 28" mount/demount tire tool

Universal design, fits all walk behind mowers
14" W X 16" L